Server Error Messages 5800 - 5899
982
5861 16 The current ’max memory’ value ’%ld’, is not sufficient to change the parameter ’%s’
to ’%ld’. ’max memory’ should be greater than ’total logical memory’ ’%ld’ required for the configuration.
Explanation: Refer to the writeup for this error.
5862 18 Invalid portion encountered.
Explanation: Each ASE configuration parameter has certain attributes, called portions
(such as name, datatype etc) associated with it. If the server finds invalid attributes for a
parameter, this error is raised. Contact Sybase Technical Support with th e serve r v ersion
and SWR level, and the text of the command that raised the error.
5863 18 Invalid group encountered.
Explanation: Refer to the writeup for this error.
5864 18 Invalide option encountered in `%s'.
Explanation: Error occurred during validation of configuration parameters for async i/o
or online engines. Sybase Technical Support with the server version and SWR level, an d
the text of the command that raised the error.
5865 18 error in os_get_cpu_count: %d
Explanation: Refer to the writeup for this error.
5866 10 Configuration file `%s' has been written and the previous versi on has been renamed to
`%s'.
Explanation: Refer to the writeup for this error.
5867 16 The wash size for the %dk buffer pool in cache %s has been incorrectly configured. It
must be a minimum of %d buffers and a maximum of %d percent of the number of buffers
in the pool.
Explanation: Refer to the writeup for this error.
5868 16 Invalid type configured for cache %s. C ache type may be one of mixed OR log only but
NOT both.
Explanation: Refer to the writeup for this error.
5869 16 Invalid buffer size of %dk for cache %s. Valid buffer sizes are powers of 2 between %dk
and %dk inclusive.
Explanation: Command failed. Check syntax and semantics. Check your configuration
file and any configuration parameters supplied.
5870 16 An invalid buffer size of %dk was encounterd in cache %s. Valid buffer sizes for caches
are powers of 2 between %dk and %dk inclusive.
Explanation: Command failed. Check syntax and semantics. Check your configuration
file and any configuration parameters supplied.
5871 16 Invalid pool size of %dk (%d buff ers) e nco unte red for the %d k po ol in cac he %s. Bu f fer
pools must have a minimum total size of %dk or %d buffers, whichever is greater.
Explanation: Command failed. Check syntax and semantics. Check your configuration
file and any configuration parameters supplied.
Number Severity Text and Explanation