CHAPTER 4 Backup Server Error Messages
695
1.22.2 2 Unable to configure the maximum number of
SRV_PROCS to %1!.
Explanation: An attempt to configure the Open
Server run-time values to allow the specified number
of Server threads failed. Backup Server uses one
thread per dump or load connection plus an additional
thread for each stripe. Use the -P option to increase the
number of threads.
1.23.2 2 Unable to configure the maximum number of network
read buffers to %1!.
Explanation: An attempt to configure the Open
Server run-time values to allow the specified number
of network read buffers failed. These buffers are used
for Server to Server connections, and the configuration
value is hard coded to 10.
1.24.2 2 Unable to configure the maximum number of
connections to %1!.
Explanation: Attempt to configure the Open Server
run-time values to allow the specified number of
network connections failed. The value of the -C option
(/connections in Digital OpenVMS) to the
backupserver command is used for the configurable
value. Check the line in your RUN_servername file
and see the entry for backupserver in Adaptive
Server Utility Programs for your platform.
1.25.1 1 Logging Backup Server messages in file `%1!'\n
Explanation: Indicates that Backup Server messages
are being written to the file named.
1.26.1 1 Unable to open Backup Server message log file `%1!'\n
Explanation: Check the path to the message log file.
Make sure that the SYBASE environment variable is
set correctly.
1.27.1 1 Operating system swap space is low. The operating
system may kill the Backup Server.
Explanation: This is an RS6000 error only. The
operating system will kill “random” processes in an
effort to free space for critical processes. This message
indicates that the Backup Server could be chosen. If
necessary, reconfigure the Backup Server process as
critical.
Number Severity Text and Explanation