Server Error Messages 10300 - 10399
1106
10359 18 The curread and curwrite labels of the Client do not equal the connection level for the
remote Server.
Explanation: Command failed due to internal Adaptive Server problem. Perform any
diagnostic action indicated by message. Report the error to your System Admi nistrator.
10360 18 Site `%.*s' not found in sysservers.
Explanation: Command failed due to internal Adaptive Server problem. Perform any
diagnostic action indicated by message. Report the error to your System Admi nistrator.
10361 14 The attrib_notify() function can only be used from a system stor ed procedure or with ad
hoc updates enabled.
Explanation: Check that the function is called from the allowed procedure.
10362 14 The logschema() built-in function can only be called from the following stored proce dures:
sp_rename, sp_setreplicate, sp_setreptable, sp_setrepproc.
Explanation: Check that the function is called from the allowed procedure.
10363 14 The built-in function '%.*s' can only be called from system stored procedures.
Explanation: Check that the function is called from the allowed procedure.
10364 14 Permission denied. You must either be the da tabase /objec t owner or possess the follow ing
roles in order to perform this operation: '%.*s'.
Explanation: You do not have the permission to execute this comm and . Have the o bject
owner or a user with the needed role run this command.
10365 14 Permission denied. You must have '%s' access on the table to lock it in '%s' mode.
Explanation: Failure to execute command LOCK TABLE in either shared or exclusive
mode. Check permissions.
10366 14 System catalog updates are not allowed in transactions with %s as coordinator.
Explanation: Command failed due to invalid or illegal request. Adaptive Server cannot
perform the requested action. Take any corrective action indicated by the message.
10367 14 Permission denied on the %s ACF built-in.
Explanation: You do not have permission to execute this command. Have the object
owner or a user with the needed role run this command.
Number Severity Text and Explanation