Backup Server Error Messages 4.1.2 - 4.75.3
714
4.16.2 2 Label validation error: read of tape mark failed.
Explanation: Errors similar to 4.9.2–4.12.2.
4.17.2 2 The stripes on the specified devices have completed,
but more dump stripes exist.
Explanation: This message arises when loading fro m
fewer stripes than the number used at dump time. At
load time, there must be at least one instance of every
device type used at dump time.
4.18.2 2 Unsupported device type. The stat() system call
returned type '%1!' for '%2!'. Refer to your operating
system documentation for more details.
Explanation: The archive device type is either an
operating system file, raw fixed disk, raw unloadable
disk (for example, floppy disk), tape, or network
location (device_name AT
remote_backup_server_name). Select a device of a
legal type.
4.19.2 2 Label validation error: too many trailer labels.
Explanation: Errors similar to 4.9.2–4.12.2.
4.20.2 2 Device `%1!': I/O error, write of tape mark failed.
Explanation: Errors similar to 4.9.2–4.12.2.
4.21.2 2 Device `%1!' should be marked `list only', but is not.
Cannot continue this command.
Explanation: Errors similar to 4.9.2–4.12.2.
4.22.1 1 Option %1! is not valid for device `%2!'.
Explanation: Indicates a device option not
appropriate for the device type. Review legal options
for device types.
4.23.2 2 %1!: read %2!: %3!.
Explanation: Indicates a read or write system call
error on a disk or file device. Investigate possible
causes (for example, out-of-space condition.) This
error aborts the dump or load.
4.24.2 2 %1!: write %2!: %3!.
Explanation: Indicates a read or write system call
error on a disk or file device. Investigate possible
causes (for example, out-of-space condition.) This
error aborts the dump or load.
Number Severity Text and Explanation