Backup Server Error Messages 2.1.2 - 3.55.2
710
3.40.2 2 Illegal length for parameter #%1! for RPC %2!;
expected %3! got %4!.
Explanation: Internal error, contact Sybase
Technical Support. Error in the session initiator
(Adaptive Server or Backup Server), a violation of th e
RPC API.
3.41.2 2 Illegal max-length for parameter #%1! for RPC %2!;
expected %3! got %4!.
Explanation: Internal error, contact Sybase
Technical Support. Error in the session initiator
(Adaptive Server or Backup Server), a violation of th e
RPC API.
3.42.1 1 %1! is complete (database %2!).
Explanation: Informational message that Backup
Server processing for the session is complete (the
dump or load command may continue to run, for
example, to clear the region of the loaded database
above the dump-time high page).
3.43.1 1 Dump phase number %1! completed.
Explanation: Informational message that a dump
synchronization phase has completed.
3.44.2 2 The Backup Server is already performing a deferred
shutdown; only one may be active at a time.
Explanation: Shutdown is in progress and will occur
when all dumps and loads have completed.
3.45.1 1 Attention received: cancelling deferred shutdown.
Explanation: Internal error, contact Sybase
Technical Support.
3.46.2 2 Deferred shutdown wait failed, cancelling deferred
shutdown.
Explanation: Internal error, contact Sybase
Technical Support.
3.47.2 2 The Backup Server is undergoing shutdown. Your
session will terminate immediately. Please reattempt
connection later.
Explanation: This message is issued in response to a
dump or load command after a shutdown request has
been sent but before the Backup Server has actually
shut down.
Number Severity Text and Explanation