Installing and Removing Hardware | 95 |
Internal battery |
Replace the battery in the procedure described below, while referring to “Before starting operation” on page 48:
1Write down the system configuration information.
2Shut down and switch off your server.
3Unplug the power cable.
NOTE: Don't replace the battery when your server is on, oth- erwise your server or the internal battery could be damaged.
4Remove the server panels.
See “Removing and replacing the server panels” on page 54.
5Remove the power supply unit.
See “Power Supply Unit” on page 69
6Remove four screws and the board for the wireless card.
Removing the board for the wireless card