Installing and Removing Hardware

55

Removing and replacing the server panels

4Remove the front panel.

See “Front panel” on page 11

5Remove nine screws and the top panel.

Removing the top panel

Replacing the top panels (for Micro Tower Types)

Follow these steps to replace the top panel:

1Replace the top panel to the server carefully so that it does not catch any cable.

2Fix the top panel using nine screws.

3Fix the outer cover (upper and bottom) using eight screws.

4Attach the front panel.

5Plug the power cable.

Removing/replacing the top panel (for Rack Types)

Remove/replace the top panel after sliding the server out of the rack.

The outer cover is not provided on Rack Types.

See “Sliding the server out of or into the rack” on page 66