Installing and Removing Hardware

101

Hard Disk Drive (HDD) –IDE HDD–

2Confirm the position of a faulty device.

The STS indicator of the faulty device is lit amber.

CAUTION: The hard disk drive generates heat when in use. To avoid burns, hold the disk tray when removing the hard disk drive.

3Tilt over the detachable lever of the slot which holds a defec- tive hard disk drive, by pulling its knob toward you.

Pulling the detachable lever toward you

NOTE: Before pulling out the hard disk drive, make sure that it is faulty. If a normally operating device is pulled out by mis- take, it may damage the server or destroy and lose important programs or data.

4While holding the disk tray, carefully remove the hard disk drive that is pulled out halfway.