180

Installing Software

NetWare

(2) The CD-ROM drive is recognized by MS-DOS.

To make the MS-DOS recognize the CD-ROM drive, set up the MS-DOS environment as mentioned in the preceding step (1) and set the floppy disk labeled “DOS Disk” (created by the Toshiba Server Setup Tool) on the floppy disk drive. Then, operate as follows:

1Create the directory XXX in the drive C for installing the CD- ROM driver. The “XXX” is an arbitrary directory name.

2Input “A:” and press the <Enter> key to shift it to the drive A.

3Copy the “TEAC_CDI.SYS” from the DOS Disk in the drive A to the XXX directory.

4Add the following line to the first line of the “Config.sys.”

DEVICE=C:\XXX\TEAC_CDI.SYS /D:CD01 /P:P

5Add the following line to the first line of the “Autoexec.bat.”

C:\DOS\MSCDEX.EXE /D:CD01 /M:15

6Restart the system.

For installing NetWare 5.1 manuallySelecting the driver when installing NetWare 5.1

When the installation of NetWare 5.1 starts, the installer detects the SCSI controller and the network adapter, and automatically assigns drivers contained on the NetWare CD-ROM. However, use the driver that comes with this system instead of these drivers.

Selecting the IDE RAID Controller driver

The installer detects the SCSI controller, and the following menu appears.

Select “Modify,” and replace the driver according to the following procedure: