Toshiba Z300 When using on Windows 2000:

Installing Software	195
AFT, ALB and IPSec functions

13The Behavior screen is displayed. Set as follows:

cMark the “Secure initiator” checkbox at “Behavior”.

cEnter the temporary shared key at “Pre Shared Key”.

NOTE: Any character string (alphabetics, numbers, symbols) of six characters or more can be used as the temporary shared key. This key is an encryption key that is used tempo- rarily when initially determining the encryption key for per- forming communications in the IPSEC mode. For this reason, set the same text string on servers and clients that might communicate with each other.

14Click “Next”.

15The Start copying file screen is displayed. Click “Next”.

NOTE: In this screen, you can check the temporary shared key that you set in the Behavior screen.

16The Setup Complete screen is displayed. Mark the “Yes, I want to restart my computer now.” checkbox and click “Finish”.

Clicking “Finish” restarts the server.

After the server is restarted, IPSEC functions for the card for which the “enable IPSEC” checkbox was marked in procedure 2 are enabled. From here onwards, use of IPSEC functions on that card can be canceled by unmarking the “enable IPSEC” checkbox and restarting the server. After this, IPSEC functions can be reenabled by marking the “enable IPSEC” checkbox and restarting the server.

When using on Windows 2000:

To use on Windows 2000, Service Pack 1 or later is required.