156 | System Configuration Setup |
Remote Management and Front Panel Display Setup Tool |
The Remote Management and Front Panel Display Setup Tool is used for setting/updating information for enabling remote management on the NetWare environment, and for setting display characters on the front panel display.
When using Remote Management and Front Panel Display Setup Tool, create a floppy disk from the Toshiba Server Setup Tool.
How to start up and operate the setup toolInsert the floppy disk created using Toshiba Server Setup Tool into the floppy disk drive, and start up the system. The following selection screen appears. In this screen, select the desired menu.
1 TOSHIBA Remote Management Setup Tool
2 TOSHIBA Front Panel Display Setup Tool
Enter a choice : 1
To set up the LAN environmentWhen the menu appears, select 1 TOSHIBA Remote Management Setup Tool.
The following selection appears.
TOSHIBA Setup Remote Management Setup Tool Version x.xx
COPYRIGHT TOSHIBA CORPORATION 2001. ALL RIGHTS RESERVED.
*** Current Remote Management Setup Data ***
LAN1 IP Address = nnn.nnn.nnn.nnn
Subnet Mask = nnn.nnn.nnn.nnn
LAN2 IP Address = nnn.nnn.nnn.nnn
Subnet Mask = nnn.nnn.nnn.nnn
*** Please Select Menu ***
[1]Setup LAN1 IP Address
[2]Setup LAN2 IP Address
[3]Setup LAN1 Subnet Mask
[4]Setup LAN2 Subnet Mask Please Input