Installing Software | 187 |
NetWare |
When the NetWare installer detects the SCSI disk adapter and the network adapter, it displays a window as shown below.
Choose the Server
This is a summary of automatically or manually selected devices.
Select additional drivers as needed.
| Driver names |
Disk and | > Adpt IDEATA |
Network(LAN) Drivers | > E100B |
options
Select additional or modify selected Disk/LAN drivers
Continue installation
The onboard SCSI controller, onboard network adapter, and RAID controller use the drivers stored on the driver disk that comes with your system. In this message box, therefore, proceed to “Select additional or modify selected Disk/LAN drivers,” and delete all drivers other than “IDEATA.”
Selecting the IDE RAID Controller driver
After selecting the driver following the procedure of the previous section “Selecting the SCSI Riser Card Controller driver,” follow the procedure mentioned below:
1Select “Select an additional driver.”
2Set the floppy disk labeled “AMI MegaRAID IDE ” (created with the Server Setup Tool) in the floppy disk drive.
3Select “Install an unlisted driver <Ins>” by pressing the <Insert> key.
4Press the <F3> key and specify the following directory under the floppy disk drive.