Installing and Removing Hardware

49

Before starting operation

Before starting operation

WARNING: When installing an optional device, be sure to use genuine Toshiba parts or those recommended by Toshiba.

If any other device is used, it may result in a fire hazard. For more information about optional devices, consult an authorized MAGNIA service provider.

Do not touch any part irrelevant to the installation work. The server contains many high-tension parts, which if touched may cause an electric shock.

While carrying out installation work on the peripheral unit, take extra care not to drop any removed screws in to the equipment. During installation always follow the instructions. carefully. Tightly fasten every screw. If a screw drops inside the equipment, it may result in a fire hazard.

CAUTION: When installing/removing optional devices, it is recommended to wear gloves, due to the sharp-edges located inside of the server.

NOTE: When installing an optional device, carefully follow the instructions according to the optional device.

Before installing or removing an optional device, always disconnect the power cable from the server.

Before installing or removing optional devices carefully read the instructions that came with the device.

When installing/removing components, always work in an environment which has low humidity, minimal dust, and no direct sunshine.