System Configuration Setup

155

SCSI Utility

Specifies whether logical unit numbers are supported.

c Include in BIOS Scan

: Yes

Specifies whether the device is to be scanned when SCSI BIOS starts.

cAdvanced Configuration Options

Sets up detailed data on the SCSI controller.

c Reset SCSI Bus at IC Initialization : Enabled

Specifies whether or not to reset the SCSI bus during the SCSI controller resetting process.

cDisplay <Ctrl><A> Message
During BIOS Initialization

: Enabled

Sets data to be displayed in the SCSI Utility startup message.

cExtended BIOS Translation for
DOS Drive > 1Gbyte

: Enabled

Specifies whether extended BIOS is to be enabled or disabled for a DOS drive with a disk capacity exceeding 1 GB.

cVerbose/Silent Mode: Verbose

Controls the data displayed during startup.

c Host Adapter BIOS

: Enabled

Enables or disables the Host SCSI Adapter BIOS.

c Domain Validation

: Enabled

Enables or disables the Domain Validation.

cSupport Removable Disks Under
BIOS as Fixed Disks

: Boot Only

Specifies whether removable disks are to be supported under

SCSI BIOS.BIOS

c Support for Int13 Extensions

: Enabled

Enables or disables Int13 Extension.