Installing and Removing Hardware | 69 |
Power Supply Unit |
The power supply unit must be removed and attached when replacing or adding on memory or batteries.
NOTE: The installation and replacement of the power supply unit requires special technology and knowledge. If you have no experience in installing the power supply unit or if you need assistance, consult your authorized MAGNIA service provider.
Before removing the power supply unit, carefully read “Before starting operation” on page 48 and proceed as follows:
1If the server is in operation, first shut it down and switch off the power supply to it.
2Unplug the power cable from the AC outlet.
3Remove the outer covers and server panels from the server. See “Removing and replacing the server panels” on page 54.
4Remove six screws, lift up the power supply unit by sliding forward slightly.
Lifting up the power supply unit.