196

Installing Software

AFT, ALB and IPSec functions

Creating the PROSetII icon

The PROSetII icon is used for setting AFT/ALB.

1The Toshiba Server Setup Tool CD-ROM (supplied) in the CD-ROM drive.

Note: A the screen that is displayed after the CD-ROM is inserted, click “Exit” to close the screen.

2Browse the CD-ROM drive on Explorer, and double-click setup.exe in the following directory:

<CD-ROM drive>: \Public\Utils\Intel\Aft-alb\Setup\setup.exe

3When the “Component Selection” screen is displayed, mark the “Proset II” checkbox, and click “Install”.

Note: Do not mark the “Desktop Management Interface”, “Intel PRO Network Adapters WMI Provider” and “Intel Pri- ority Packet II”.

4

Click “Information” → “Next”.

5

Click “Setup complete” → “Finish”.

6Reboot the server.

7After the server has rebooted, make sure that the “PROSetII” icon appears on the control panel.

When using AFT (Adapter Fault Tolerance) and ALB (Adaptive Load Balance)

Setup of AFT (Adapter Fault Tolerance)/ALB (Adaptive Load Balance)

1 Double-click “Intel(R)PROSetII” from “Start” → “Settings”

→“Control Panel”.