Getting Started | 17 | |
Front view (with the front panel opened) | ||
|
|
|
Two messages can be set by Remote Management and Front Panel Display Setup Tool in the case of a Netware environ- ment.
See “System Configuration Setup” on page 138.
or the
“Harness Eye/web User’s Guide” (on the Documentation CD- ROM)
3. Trouble informationWhen a problem occurs, the details of the problem and the location where the problem occurred are displayed flashing on the panel.
When the trouble information exceeds 16 characters, the display can be scrolled to display all the information.
Display and meaning
See “AppendixD” on page 237.
Display example
ALARM (22)
CPU1 thermal error.
Holding down the display change button for at least four seconds displays the user message or system configuration. Also, holding down the button for at least four seconds with the user message or system configuration displayed displays the trouble information.
4. Bootup/shutdown messagesThe following message is displayed blinking when the server is booted up and shut down. (scroll display)
At bootup
System booting. Please wait a moment.
POST code