174 | Installing Software |
Windows® 2000 Server |
Selecting the disk driver
Selecting the IDE CD-ROM Controller driver
Use the driver contained on the
Selecting a driver for the IDE RAID controller
To select the driver, follow these steps.
1Press the <F6> key after the Windows 2000 Server Setup win- dow has turned entirely to blue.
2When a message appears on the screen, asking whether you want to add a device driver for mass storage device, press the <S> key.
3Insert the AMI IDE RAID Windows 2000 Driver floppy disk into the floppy disk drive, and then press the <Enter> key.
4When the following message appears, select “AMI Mega- RAID IDE 100 Driver With Backplane Support(Windows 2000)”.
AMI MegaRAID IDE 100 Driver With Backplane Sup- port(Windows NT)
AMI MegaRAID IDE 100 Driver With Backplane Sup- port(Windows 2000)
Selecting a driver for the SCSI Riser Card controller
To select the driver, follow these steps.
5Press the <F6> key after the Windows 2000 Server Setup win- dow has turned entirely to blue.
6When a message appears on the screen, asking whether you want to add a device driver for mass storage device, press the <S> key.
7Insert the Adaptec Ultra160 Series Windows 2000 Driver floppy disk into the floppy disk drive, and then press the <Enter> key.