104

Installing and Removing Hardware

Expansion cards

Installing the SCSI riser card

WARNING: Do not touch any parts except those necessary for installing the device. There are many high-voltage parts that may cause an electric shock.

When installing or removing the expansion card, shut the server down, switch off the power, and pull out the power plug from the wall outlet. This may cause an electric shock.

CAUTION: It is advisable to wear gloves when installing or removing the expansion card. Hands may be injured by sharp objects on the optional boards or the server.

The following describes how to replace the SCSI riser card.

Install the expansion card as follows, while referring to the section “Before starting operation” on page 48:

1If the server is running, shut it down and switch off the power.

2Unplug the power cable.

NOTE: Installing the expansion card while the power is on may damage the server and expansion card.

3Remove the server panels.

See “Removing and replacing the server panels” on page 54.

4Remove two screws which fix the PCI bracket, then remove one screw.