148 | System Configuration Setup |
BIOS setup utility |
This section describes the security settings available in the BIOS Setup Utility.
Supervisor Password is: | Clear |
User Password is: | Clear |
Set Supervisor Password | [Enter] |
Set User Password | [Enter] |
Diskette Access: | [User] |
Password on Boot: | [Disabled] |
|
|
Allows Supervisor Password to be registered, changed, and/or deleted. To delete a password, press <Enter> with “New Pass- word”. You are prompted to enter the password when the BIOS setup utility or OS is started up.
cSet User PasswordAllows User Password to be registered, changed, and/or deleted. This can be set only when the supervisor password is set. You are prompted to enter the password when the BIOS setup utility or OS is started up.
NOTE: For security reasons, the passwords do not appear on the screen. If you forget the passwords, shut down the server and clear the CMOS.
See Appendix C “Switch Setting” on page 232
c Diskette Access | :[User] |
Do not change this setting. |
|
c Password on Boot | :[Disabled] |
Specifies whether or not a password input request message is to be displayed when starting the operating system.