System Configuration Setup

169

Configuring MegaRAID IDE

Delete Array (F5)

Press the <F5> key to delete a currently configured array. Use arrow keys to go over to the array you want to delete and then press <F5>.

CAUTION: Use this option with caution. When you delete an array, you lose the array configuration and the data saved in the array.

Restore Old Configuration (F6)

Press the <F6> to restore the configuration that was there before you entered the MegaRAID IDE setup utility.

Edit Options (F7)

Press the <F7> key to set the options to enable/disable Drive Write Cache, Boot Sector Virus Protection, DMA transfers, and Buzz- ers. To select an option, press <F3>, move the cursor to the desired option and press the spacebar. This puts a check by the option. Press the <Enter> key to activate the new option.

A status box for each item displays in the Physical Drives Information section of the screen. The box shows whether the option is on or off. The Write Cache displays WC-ON or WC-OFF, the Virus Protection box displays VP-ON or VP-OFF, the DMA Read/Write box displays DMA-ON or DMA-OFF, and the Buzzer display BUZ-ON or BUZ-OFF. When you turn the option on, the status box changes color, from red to green. The window for the Write Cache, Virus Protection, DMA, and Buzzer options is shown below.