Installing Software

175

Windows® 2000 Server

8When the following message appears, select “Adaptec AIC- 7892 Ultra160 SCSI ”.

Adaptec ACI-7892 Ultra160 SCSI

Selecting a driver for the RAID controller E/F (MR493/MR475)

To select the driver, follow these steps.

1Press the <F6> key after the Windows 2000 Server Setup win- dow has turned entirely to blue.

2When a message appears on the screen, asking whether you want to add a device driver for mass storage device, press the <S> key.

3Insert the Windows 2000 Driver floppy disk, which comes with your RAID controller, into the floppy disk drive, and then press the <Enter> key.

4When the following message appears, select “MegaRAID Express500 RAID Controller Driver” for MR475 or “Mega- RAID Elite1600 RAID Controller Driver” for MR493 .

MegaRAID Express500 RAID Controller Driver

MegaRAID Elite1600 RAID Controller Driver

MegaRAID Enterprise1600 RAID Controller Driver

After this, continue to install Windows 2000, following the instructions that appears on the screen.

NOTE: If the RAID Controller is connected to the server, be sure to install the “Power Console” of the RAID Controller Utility after installing the Windows 2000 Server.

See “MegaRAID Software Guide” for details of the Power Console.