System Configuration Setup

139

BIOS setup utility

Starting the setup utility

The BIOS screen will appear when the server is started.

Phoenix BIOS 4.0 Release X.X.X.XX

Copyright 1985-2000 Phoenix Technologies Ltd.,

All Rights Reserved

BIOS Version X.X

VIA Apollo Pro133AX ( VT82C694X + VTA686B )

CPU = Pentium (R) III Processor XXX MHz

XXXXXXXXSystem RAM Passed XXXXXXXX Extended RAM Passed 0256K Cache SRAM Passed System BIOS Shadowed

Video BIOS Shadowed

UMB upper limit segment address : XXXX Keyboard Detected

Mouse initialized

Press <F2> to enter SETUP

To start the BIOS Setup Utility, press the F2 key immediately after the BIOS screen appears. The message “Entering Setup...” appears on the screen. After the system completes the Power-On- Self-Test (POST), the BIOS Setup Utility is loaded.

NOTE: If F2 is not pressed, the operating system is loaded after the Power-On-Self-Test (POST) sequence is completed.