Installing Software

197

AFT, ALB and IPSec functions

2Select a LAN adapter to which AFT/ALB is to be configured in the list of adapters in “Intel(R)PROSetII”, and select “Right

click” → “Add Team” → “Create New Team”.

3The “Teaming Wizard” screen is displayed. Select either “Adapter Fault Tolerance” or “Adaptive Load Balancing”, and select “Next”.

4Mark the LAN adapter to add to the configuration, and select “Next”.

5Select “Done” at “Team Wizard”.

6The icon “member Adapters” appears in the PROSetII screen. Among the adapters to which AFT/ALB is installed, select the

adapter to set as the primary, set “Right click” → “Preferred Primary”, and then set the remaining adapters by “Right click”

→“Preferred Secondary”.

7Exit PROSetII by “OK”

8 Double-click “Network” from “Start” → “Settings” → “Con- trol Panel”.

9Select the “Protocol” tab, open the properties of the adapter that was added at AFT/ALB from among the TCP/IP protocol, and set the IP address and other network settings.

10Reboot the server.

Setup of IPSEC

On Windows 2000, set IPSEC functions by selecting the policy to be used after setting the IP security policy.

1Create the IP security policy as follows.

(1)Open the Control Panel at “Start” - “Settings” - “Control Panel”.

Click “Adminstrative Tools”, and then click “Local security policy” to open the “Local Security Policy” screen.

(2)Select “Create IP Security Policy” with “Security Settings, IP Security Policy on Local Machine” in the “Local Security Pol- icy” screen clicked by the right mouse button, and release your