Switch Setting

Hardware setup information

Perform the following operations if the hardware setup information is to be forcibly returned to the standard settings (CMOS Clear):

1Disconnect the AC power cable.

2Remove the server panels, power supply unit and board for wireless card.

3Set the jumper switch PJ47 on the motherboard to 1-2 short.

PJ47:

1-2 short

... Clears the hardware data settings.

 

3-4 short...

Standard (Defined data)

4Install the board for wireless card, power supply unit and server panels, and connect the AC power cable.

5Turn on the server.

CMOS is cleared and the power is automatically turned off.

6Disconnect the AC power cable.

232