102

Installing and Removing Hardware

Hard Disk Drive (HDD) –IDE HDD–

Pulling out the hard disk drive

5Install a new hard disk drive in the same procedure as for extension.

See “Installing the hard disk drive” on page 98.

6After a short time, confirm that the PWR indicator lights up.

7Attach the front panel.

8Recover (rebuild) the disk.

NOTE: If the server uses IDE RAID for redundancy, the oper- ation is continued by a spare device without stopping the sys- tem, even if one of the hard disk drives that configure a disk array fails (downgraded operation). However, if another device fails, it may destroy and lose important programs or data. Replace the faulty device by a normal one as quickly as possible, and recover the disk array.