194

Installing Software

AFT, ALB and IPSec functions

cThe LAN card and the device driver for the LAN card are installed.

cPROSETII is installed.

2Install AFT/ALB.

3Open the control panel by “Start” - “Settings” - “Control panel”, and start up “Intel(R)PROSet II”.

4Select one LAN adapter to use IPSEC functions on from the “Intel(R)PROSet II” adapter list, click the right mouse button, and check the “enable IPSEC” checkbox.

5In the same way, check the “enable IPSEC” checkbox for all cards requiring IPSEC functions.

6Click “OK”.

7A screen prompting you to restart the server will be displayed. Restart the server.

NOTE: Packet Protect cannot be installed unless the check- boxes for all LAN cards in the PROSet II screen are marked. IPSEC will not be enabled for LAN cards unless the checkbox of the LAN card on which IPSEC functions are to be used is marked.

8Insert the SetupInstructor CD-ROM in the CD-ROM drive.

9Execute the following command:

<CD-ROM>: \Public\Utils\Intel\Aft-alb\Pktpt\NT4\setup.exe

10The Welcome to Packet Protect Client Install screen is dis- played. Click “Next”.

11The Software License Agreement screen is displayed. Click “Next”.

12The Choose Destination Location screen is displayed. Click “Next”.

Leave the destination location at the default setting.