Troubleshooting
See the operating manual of the expansion card.
See the operating manual of the peripheral devices.
1Are all cables firmly and properly connected?
Check only the cables within the scope described in this man- ual, and instruction manuals for expansion cards and periph- eral devices.
2Is a floppy disk inserted in the floppy disk drive?
3Are the jumper switches and other switches set properly on expansion cards and peripheral devices?
4Are expansion cards and Hard Disk Drive (HDD) properly connected?
5Is the Hard Disk Drive (HDD) properly formatted and set up if added?
6Is the correct version of each device driver installed?
7Is the server selected if the switch box is used on a Rack Type?
Windows NT/2000 is locked or cannot be usedCheck the previous items to see if those items apply. If an item applies, carry out the remedy for that item. If none of the items apply, reboot the server. If Windows NT/2000 can be used after rebooting the server, see “Remedy When Windows NT/2000 is Usable” on page 212.
If Windows NT/2000 cannot be used, see “Remedy When Windows NT/2000 is Unusable” on page 213.
Trouble information or error log still remains in the server monitor function software and other software
Check the previous items to see if those items apply. If an item applies, carry out the remedy for that item. If none of the items apply, reboot the server. If Windows NT/2000 can be used after rebooting the server, see “Remedy When Windows NT/2000 is Usable” on page 212.