188

Installing Software

NetWare

A: \NetWare

5Press the <Enter> key to retrieve drivers contained in the floppy disk.

6When the driver list appears, select the following driver.

MEGAIDE.HAM Netware NWPA HyperDisk HAM Driver

Proceed with installing operation, following the instructions that appear on the screen.

Selecting the SCSI Riser Card Controller driver

Follow the procedure mentioned below:

1Move the cursor to “Select additional or modify selected Disk/ LAN drivers” on the screen shown above with the arrow keys, and press the <Enter> key.

2Insert the Adaptec Ultra160 ASPI & SCSI driver for NetWare created with the Toshiba Server Setup Tool in the floppy disk drive.

3Select “Select an additional driver” first, and select “Install an unlisted driver <Ins>” next.

4Press the <Enter> key to retrieve drivers contained in the floppy disk.

5When the driver list appears, select the following driver.

ADPT160.HAM Adaptec Ultra160 ASPI & SCSI Driver

6Input slot Number “10011” to ADPT160M Parameters

Proceed with installing operation following the instructions that appear on the screen.

Selecting the RAID Controller driver

After selecting the driver following the procedure of the previous section “Selecting the SCSI Riser Card Controller driver,” follow the procedure mentioned below: