Installing and Removing Hardware

67

Removing and replacing the server panels

Sliding the server (Rack Type) out of the rack

Slide the server out of the rack in the procedure described below, while referring to “Before starting operation” on page 48.

1If the server is running, shut it down and switch off the power.

2Switch off all the peripheral units connected with the server.

3Unplug the power cable of the server from the AC outlet or UPS (uninterruptible power supply).

4Unplug all the cables from the server.

5Loosen the four claw screws which fix the Base Assembly and draw out the Base Assembly.

Claw screw

Drawing out the Base Assembly

When turning the claw screws, remove the front panel so that you do not catch your fingers.

6Remove the screw (M3) fixing the Base Assembly to the server.