Installing Software

173

Windows® 2000 Server

Windows® 2000 Server

You can install Windows 2000 Server on your server in two different ways: installing it automatically using the Toshiba Server Setup Tool or installing it manually, by following the normal installation steps set for Windows 2000.

This section explains how to install Windows 2000 manually.

See the “Toshiba Server Setup Tool User's Guide” (on the Documentation CD-ROM) for the procedure of the automatic installation.

Setting the motherboard

Before proceeding to the installation of Windows 2000 Server, start the BIOS Setup Utility on your system, and specify “WinNT2K” under “Installed O/S” in the Advanced menu.

Note that selecting “Other” from this menu could cause your system to malfunction.

Creating driver disks

To manually install Windows 2000, you need to first copy a driver to a floppy disk, using the Toshiba Server Setup Tool.

Start the Toshiba Server Setup Tool, select “Utilities” and “Create Floppy Disks,” and copy the following driver to a floppy disk.

cAMI IDE RAID Windows 2000 Driver, if IDE RAID control- ler is used.

cAdaptec Ultra160 Series Windows 2000 Driver, if SCSI riser card is used.

cIntel LAN Windows 2000 Driver