190

Installing Software

NetWare

4When the driver list appears, select the following driver.

CE100B.LAN Intel(R) PRO PCI Adapter(CHSM spec 1.11)

IANS.LAN Intel(R) Advanced Network Services Driver

5Input slot number “10005” to CE100B Parameters.

Proceed with installing operation, following the instructions that appear on the screen.

Installation of Multi CPU Options

When the system is used in a 2CPU configuration, follow the procedure below to install the multi CPU options after installing NetWare.

1Start up NetWare, and select “Multi CPU Options” in the Install screen.

2Select the following driver from the list of drivers displayed at “Select platform support module”.

MPS14.PSM Platform Support Module for Intel MPS Compliant Systems

Reboot the unit to enable multi CPU options.

Procedure after installation of the NetWareSetup of the RAID Controller Utility

If the RAID controller is connected with the server, be sure to set up the “MegaRAID Manager” that is a RAID Controller Utility after installing NetWare. If the MegaRAID Manager is not set up, the system cannot be recovered from a disk trouble during operation.

See “MegaRAID Software Guide” for details of the MegaRAID Manager.