System Configuration Setup | 153 |
SCSI Utility |
1Using the arrow keys (<↑ ><↓ >), select the desired item then press the <Enter> key. The submenu or selection menu corre- sponding to the selected item appears.
2Make any necessary changes then save the changes.
3Select Exit this Menu to exit the submenu.
Setting DevicesSelect Configure/View Host Adapter Setting in the main menu in the device setting screen mode to display the Adaptec Utility.
Adaptec
Configuration |
|
SCSI Bus Interface Definitions |
|
Host Adapter SCSI ID ........................ | 7 |
SCSI Parity Checking ........................ | Enabled |
Host Adapter SCSI Termination ............... | Enabled |
Additional Options |
|
Boot Device Options ......................... | Press <Enter> |
SCSI Device Configuration ................... | Press <Enter> |
Advanced Configuration Options .............. | Press <Enter> |
<F6> - Reset to Hoat Adapter Defaults | |
BIOS Information |
|
Interrupt (IRQ) Channel ................. | 10 |
I/O Port Address ........................ | 9000h |
SCSI Termination Level .................. | 1 |
c Host Adapter SCSI ID | : 7 |
Specifies the SCSI ID of the SCSI host adapter. Do not change this setting.
c SCSI Parity Checking | : Enabled |
Controls whether the host adapter performs parity checks and scans for normal data transfer through the SCSI bus.