26

Getting Started

Connecting peripheral devices

(3) Cooling fans

The server contains two cooling fans.

(4) CPU sockets

Used to mount CPU modules.

See “CPU module” on page 78.

(5) Memory slots

Used to mount up to 3 memory modules to expand the server’s RAM (Random Access Memory).

See “Memory module” on page 72.

(6) Expansion slot

Used to mount expansion cards. A 64 bit/66 MHz PCI card of card length 194 mm or less can be added on to the riser card. The slot is compliant with PCI 2.2 standard.

See “Expansion cards” on page 103.

(7) IDE HDD cage

The IDE HDD cage supports up to two hot-swap hard disk drives.

(8) Board for wireless card

The board for wireless card can contain 1 wireless LAN card.

Connecting peripheral devicesHow to connect peripheral devices

There are USB connectors for connecting USB devices such as FDD and so on, on the front of the server. And there are I/O connectors for connecting peripheral devices such as a keyboard, mouse, display and so on, on the back of the server. Properly connect the devices to the connectors before turning on the server.