FT-950
Operating Manual
Default Setting: Ur
When this menu is set to “Ur”, you may adjust the microphone gain using the front panel’s [MIC GAIN] knob.
MODE-CW Group
037 A1A
Function: Selects the desired keyer operation mode for the device connected to the front panel’s KEY jack.
Available Values: OFF/buG/ELE/ACS
Default Setting: ELE
OFF: Disables the front panel’s keyer (“straight key” mode for use with external keyer or
buG: Mechanical “bug” keyer emulation. One paddle produces “dits” automatically, while the other paddle manually produces “dahs”.
ELE: Iambic keyer with ACS (Automatic Character Spacing) disabled.
ACS: Iambic keyer with ACS (Automatic Character Spacing) enabled.
038 A1A
Function: Selects the keyer paddle’s wiring configuration for the KEY jack on the front panel.
Available Values: nor/rEV
Default Setting: nor
nor: | Tip = Dot, Ring = Dash, Shaft = Ground |
rEV: | Tip = Dash, Ring = Dot, Shaft = Ground |
039 A1A
Function: Selects the desired keyer operation mode for the device connected to the rear panel’s KEY jack.
Available Values: OFF/buG/ELE/ACS
Default Setting: ELE
OFF: Disables the front panel’s keyer (“straight key” mode for use with external keyer or
buG: Mechanical “bug” keyer emulation. One paddle produces “dits” automatically, while the other paddle manually produces “dahs”.
ELE: Iambic keyer with ACS (Automatic Character Spacing) disabled.
117 | Vertex Standard Co., Ltd. |