Vertex Standard FT-950 manual Effect, Shift, Width, Cont, Notch

FT-950

Operating Manual

Pressing this button to reset the status of the functions which is selected from the five buttons at the left of this button to factory default.

26. [SELECT] Knob

This knob is used to adjust the status of the functions depending on the five buttons located above this knob.

FUNCTION Switch	EFFECT
SHIFT	Rotate this knob to vary the passband of the IF DSP filter by 20
	Hz steps. The total adjustment range is ±1 kHz.
	The position of the passband can be observed on the display.
WIDTH	Rotate this knob to set the overall bandwidth of the DSP IF
	filter.
	Counter-clockwise rotation reduces the bandwidth, while
	clockwise rotation increases the bandwidth.
	The current bandwidth can be observed on the display.
CONT	Pressing this knob to turn the CONTOUR filter on and off.
	Rotate this knob to select the CONTOUR filter response.
	The peak position of the CONTOUR filter can be observed on
	the display.
NOTCH	Pressing this knob to turn the IF NOTCH filter on and off.
	Rotate this knob to adjust the center frequency of the IF
	NOTCH filter.
	The null position of the IF NOTCH filter can be observed on the
	display.
µ-TUNE	Pressing this knob to turn the optional RF µTuning Kit on and
	off.
	Rotate this knob to adjust the center frequency of the µ-Tuning
	filter.
	The peak position of the µ-Tuning filter can be observed on the
	Tuning Offset Indicator field of the display.

This knob also uses to select the Menu item when the Menu mode is engaged.

Press and hold this knob for two seconds to activate the optional Voice Memory feature for the SSB/AM/FM modes, or the Contest Keyer for the CW mode. See page ?? (Voice Memory feature) or page ?? (Contest Keyer) for details.

27. [(VFO-A) RX] Indicator/Switch

This button, when pressed, the transceiver receives the VFO-A frequency. The LED inside this button will glow green when the transceiver receives the VFO-A frequency. When the transceiver receives the VFO-A frequency, pressing this button momentarily will mute the receiver, and the indicator will blink. Pressing the button once more will restore receiver operation, and the indicator will glow green steadily.

28. QMB (Quick Memory Bank) Switches

20 Vertex Standard Co., Ltd.