Vertex Standard FT-950 manual MODE-DAT Group, Data DT Gain, Data V Gain

FT-950

Operating Manual

Default Setting: 15 msec

MODE-DAT Group

050 DATA DT GAIN

Function: Sets the data input level from the TNC to the AFSK modulator.

Available Values: 0 ~ 100

Default Setting: 50

051 DATA OUT LVL

Function: Sets the AFSK data output level at the output port (pin ?) of the RTTY/PKT jack.

Available Values: 0 ~ 100

Default Setting: 50

052 DATA VOX DLY

Function: Adjusts the “VOX” Delay (receiver recovery) time on the PACKET mode.

Available Values: 30 ~ 3000 msec

Default Setting: 300 msec

053 DATA V GAIN

Function: Adjusts the “VOX” Gain on the PACKET mode.

Available Values: 0 ~ 100

Default Setting: 50

054 DATA PKTDISP

Function: Sets the packet frequency display offset.

Available: –3000 ~ +3000 Hz (10 Hz/step)

Default: 0 Hz

056 DATA PKT SFT

Function: Sets the carrier point during the SSB packet operation.

Available: –3000 ~ +3000 Hz (10 Hz/step)

Default: 1000 Hz (typical center frequency for PSK31, etc.)

120 Vertex Standard Co., Ltd.