Vertex Standard FT-950 manual KEY CW MEM3 KEY CW MEM4 KEY CW MEM5

FT-950

Operating Manual

021 KEY CW MEM3

022 KEY CW MEM4

023 KEY CW MEM5

Advice: Press the [SELECT] knob to toggle the Menu item display between “Menu Item Number & Group Name” and “Menu Function”.

3.Rotate the [CLAR/VFO-B] knob to set the selected CW Memory Register to “tyP2.” If you want to text message entry on all memories, set all five Menu items (#019 ~ 023) to “tyP2.”

4.Press and hold in the [MENU] button for two seconds to save the new settings and exit.

Message Memory Programming (Using Your Paddle)

1.Set the operating mode to CW.

2.Set the [BK-IN] button to “Off”.

3.Turn the internal Electronic Keyer “On” by pressing the [KEYER] button, if necessary.

4.Press the [MEM] key on the FH-2. A blinking “REC” icon will appear in the display.

5.Press any of the FH-2’s keys numbered [1] through [5] to begin the memory storage process, and the “REC” icon will glow steadily.

6.Send the desired message using your keyer paddle.

Advice: If you do not keying within ten seconds, the memory storage process will be cancelled.

7.Press the [MEM] key on the FH-2 once more at the end of your message. Up to 50 characters may be stored among the five memories.

Note: you must exercise care in sending to ensure that the spaces between letters and words are accurately done; if your timing is off, the spacing may not come out right in the stored message.

For ease in setting up the keyer memories, we recommend you set Menu item “037 A1A F-TYPE” and/or “039 A1A R-TYPE” to “ACS” (Automatic Character Spacing) while you are programming the keyer memories.

Checking the CW Memory Contents

1.Be sure that Break-in is still turned “Off” by the [BK-IN] button.

2.Press the [MONI] button to enable the CW monitor. A “MONI” icon will appear in the display.

90 Vertex Standard Co., Ltd.