FT-950
Operating Manual
will appear in the display, and you will hear the results in the sidetone, but no RF energy will be transmitted.
Note: You may adjust the monitor level using the [MONI] knob.
1.Press the
2.Press the
you wish to transmit. A “PLAY” icon will appear in the display, and transmit the programmed message on the air.
Note: If you subsequently decide to use the “Message Memory” technique for memory storage, please note that the contents of a message stored using text input will not be transferred over when you select “Message Memory technique” on a particular memory register (the Menu Mode Setting is set to “tyP2”).
Decrementing the Contest Number
Use this process if the current contest number gets slightly ahead of the actual number you want to send (in case of a duplicate QSO, for example).
Press the
FM Mode Operation
Basic Operation
1.Press the [AM/FM] button several times, until the “FM” icon will appear in the display, to select the FM operating mode.
2.Rotate the Main Tuning Dial knob to select the desired operating frequency. Pressing the microphone’s [UP] or [DWN] button will cause frequency change in 5 kHz steps.
3.Press the microphone’s PTT switch (or press the front panel [MOX] button) to transmit. Speak into the microphone in a normal voice level. Release the PTT or [MOX] switch to return to receive.
4.Adjustment of the microphone gain may be accomplished in two ways. At the factory, a default level has been programmed that should be satisfactory for most
93 | Vertex Standard Co., Ltd. |