FT-950
Operating Manual
Advice: This switch will be affects to the VFO-A and VFO-B independently.
41. [LOCK] Switch
This button toggles locking of the Main Tuning Dial knob (for VFO-A frequency tuning) and the [CLA/VFO-B] knob (for VFO-B frequency tuning). When the button is active, the Main Tuning Dial knob and [CLAR/VFO-B] knob can still be turned, but the frequency will not change, and the “LOCK” icon appears in the display.
Advice: This switch will be affects to the VFO-A and VFO-B independently.
42. [A>B] Switch
Press this button momentarily to transfer data from the VFO-A frequency (or a recalled memory channel) to the VFO-B, overwriting any previous contents in the VFO-B. Use this key to set both VFO-A and VFO-B to the same frequency and mode.
43. [A<>B] Switch
Pressing this button momentarily exchanges the contents of the VFO-A (or a recalled memory channel) and the VFO-B.
44. [V/M] Switch
This button toggles frequency control between the memory system and the VFO-A. Either “MR” or “MT” icon will be displayed to the under the frequency display field to indicate the current selection. If you have tuned off of a Memory channel frequency (“MT” icon is appeared), pressing this button returns the display to the original memory contents (“MR” icon is appeared), and pressing it once more returns operation to the VFO-A (no icon).
45. [M>A] Switch
Pressing this button momentarily displays the contents of the currently-selected memory channel for 10 seconds.
Holding this button in for two seconds copies the data from the currently-selected memory to the VFO-A, as two beeps sound. Previous data in the VFO-A will be overwritten.
46. [A>M] Switch
Pressing this button momentarily displays the contents of the currently-selected memory channel for 10 seconds.
23 | Vertex Standard Co., Ltd. |
