FT-950
Operating Manual
5.Adjust the compression level of the Speech Processor via the Menu Item “109 TGEN PROCLVL” so that the meter needle deflects to not more than “10 dB” on the COMP meter scale. See Box at the right for details of the setting.
6.To switch the Speech Processor off, press the [PROC] button once more. The “MIC EQ” and “PROC” icons will turn off, confirming that the Speech processor is turned off.
Advice:
Excessive advancement of the compression gain will result in a degradation of the transmitted signal’s
The Transmit Monitor is very helpful way of verifying proper adjustment of the compression level. Pressing the [MONI] button then adjusting the [MONI] knob for a comfortable listening level while you are transmitting, you will be able to hear the difference in sound quality as you make adjustments.
You may set the RF power output via the Menu item “111 TGEN TX PWR”, whether or not the Speech Processor is engaged.
You may adjust the Parametric Microphone Equalizer when the speech processor is engaged, using Menu Items “100” through “108”. See page ?? for details.
When the optional
Adjust the compression level of the Speech Processor
1.Press the [METER] button repeatedly to select “COMP” (Compression) meter.
2.Press the [MENU] button to engage the Menu.
3.Rotate the [SELECT] knob to select Menu item “109 TGEN PROCLVL.”
Advice: Press the [SELECT] knob to toggle the Menu item display between “109 TGEN” and “PROCLVL”.
4.Press the PTT switch on the microphone, and speak into the microphone in a normal voice level. Rotate the
5.Press and hold in the [MENU] button for two seconds to save the new setting and exit to normal operation.
68 | Vertex Standard Co., Ltd. |
