FT-950
Operating Manual
8. Multi Function Meter
There are five functions
ALC: | Indicates the relative ALC voltage. |
SWR: | Indicates the Standing Wave Ratio (Forward: Reflected), from 1.0 to 3.0. |
ID: | Indicates the final amplifier drain current, 0 to 30 ampere. |
VDD: | Indicates the final amplifier drain voltage (nominal value: 13.8 V). |
COMP: Indicates the speech compressor level, from 0 to 30 dB.
Advice: The ALC and ID meters can be provided the
9. TUNER
This indicator appears when the internal Automatic Antenna Tuner is activated.
10.
This indicator appears if the directional coupler and microprocessor detect an abnormally high SWR condition (over 3.0:1) that cannot be resolved by the Automatic Antenna Tuner.
Note: If this indicator appears, check to be sure that you have the correct antenna selected on the current operating band. If so, you will need to check the condition of the antenna, its coaxial cable, and/or the connectors on the cable so as to locate and correct the fault.
11. MIC EQ
This indicator appears whenever the
12. REC
This indicator appears while the optional Voice Memory Unit is recording your voice message, or the Contest Keyer is recording your CW keying.
13. PLAY
This indicator appears while the optional Voice Memory Unit is playing back the recorded your voice message, or the Contest Keyer is playing back the recorded CW keying.
28 | Vertex Standard Co., Ltd. |