FT-950
Operating Manual
Transmitter Convenience Features
Voice Memory (SSB/AM/FM modes: Requires optional
You may utilize the Voice Memory capability of the
Recording Your Own Voice in Memory
1.Select the LSB, USB, AM, or FM mode using the front panel [MODE] buttons.
2.Press and hold the [SELECT] knob for two seconds to activate the Voice Memory Unit. Indicates one of following indication in
3.Rotate the [SELECT] knob to recall the Voice Memory Channel (“rEC1” - “rEC5”) you wish to record.
4.Press the [SELECT] knob. A blinking “REC” icon will appear in the display.
5.Press the microphone’s PTT switch momentarily, the “REC” icon will glow steadily, and recording will begin. If you do not press the PTT switch within five seconds of pressing the [SELECT] knob, the memory storage process will be cancelled.
6.Speak into the microphone in a normal voice level to record the message (such as “CQ DX, CQ DX, this is W 6 Delta
7.Press the [SELECT] knob to terminate the message storage process.
Checking Your Recording
1.Be sure that the front panel [MOX] button is “Off” (the LED imbedded in the switch must be off.)
2.Press and hold the [SELECT] knob for two seconds to activate the Voice Memory Unit. Indicates one of following indication in
3.Rotate the [SELECT] knob to recall the Voice Memory Channel (“PLY1” - “PLY5”) whichever one you just recorded in.
4.Press the [SELECT] knob. A “PLAY” icon will appear in the display, and you will hear the contents of the Voice Memory you just recorded.
Advice: You may adjust the playback level of the recording via Menu item “014 DVS RX LVL”.
69 | Vertex Standard Co., Ltd. |