FT-950
Operating Manual
Quick Point: The Parametric Equalizer is a unique technique for adjusting the signal quality. Because the three ranges may be adjusted so precisely, it is possible to craft a response that provides a more natural and pleasant sound than you have ever experienced before. Effective “talk power” can also be significantly enhanced.
The aspects of configuration that you may adjust on the Parametric Equalizer are: Center Frequency: The center frequency of each of the three bands may be
adjusted.
Gain:The amount of enhancement (or suppression) within each band may be adjusted.
Q:The bandwidth over which the equalization is applied may be adjusted.
Setup of the Parametric Microphone Equalizer
1.Connect the microphone to the MIC jack.
2.Set the RF output power to minimum value via the Menu item “111 TGEN TX PWR”, so as not to cause interference to other users during adjustment.
Advice:
We recommend you consider connecting a dummy load to one of the Antenna jacks, and monitor your signal on a separate receiver, so as to prevent interference to other users.
You will have the best chance of hearing the effects of adjustments if you wear headphones (connected to the monitor receiver) while monitoring your transmitted signal.
3.To adjust the Parametric Microphone Equalizer while the speech processor is disabled, press the [PROC] button until the “MIC EQ” icon appears in the display. To adjust the Parametric Microphone Equalizer with the speech processor engaged, press the [PROC] button until the “MIC EQ” and “PROC” icons appear in the display.
4.Press the [MONI] button, if you want to listen on the
5.Press the [MENU] button momentarily. The Menu list will appear in the display.
6.Rotate the [SELECT] knob to find the “EQ” Menu area, containing Menu items “091” through “100”; these parameters apply to the adjustment of the Parametric Microphone Equalizer when the speech processor is disabled. Menu items “100” through “108” apply to the adjustment of the Parametric Microphone Equalizer when the speech processor is engaged.
65 | Vertex Standard Co., Ltd. |
