Getting started
Console installation
Option 1: Connect to four single-line wall jacks
NOTES:
•Use only the power adapter supplied with this product. To order a replacement power adapter, visit our website at businessphones.vtech.com or call 1 (800)
•Plug the black telephone line cords into the L1/2 and L3/4 jacks of the console, and plug the gray telephone line cords into the L2 and L4 jacks of the console respectively.
•If you are installing less than four telephone line cords to the console, plug the telephone line cords starting from the L1/2 jack. Avoid having unoccupied telephone jack between other occupied telephone jacks.
•If you want to use an occupied Ethernet wall jack, use the PC port on the console as an Internet
6
Plug the larger end of the console power adapter into an electrical outlet not controlled by a wall switch.
Plug one end of the Ethernet cable into the Ethernet port (
) at the back of the console.
Plug the other end of the Ethernet cable into an Ethernet switch or router.
Plug the other end of the telephone lines into the
Ethernet |
|
|
|
|
switch/ | Line 4 | Line 3 | Line 2 | Line 1 |
Router |
|
|
|
|
Router |
|
|
|
|
Use only
Supplied
5.1Adapter
L4 | L3/4 | L2 | L1/2 |
Plug the small end of the console power adapter into the power jack at the back of the console.
Plug one end of the
telephone lines into the L1/2, L2, L3/4
and L4 jacks at the back of the console.
13
If you have DSL high- speed Internet service on a particular line, a DSL filter (not included) is required on that line.
The DSL filter must be plugged into the telephone wall jack.
