
Getting started
System setup
Network setup (continued)
If you want to switch from Auto set IP to Set static IP, you have to disable the Auto set IP setting first.
To disable Auto set IP:
1.When the console is idle, press MENU/SELECT.
2.Press or
to scroll to System Setup, then press MENU/SELECT or
/SKIP.
3.Press or
to scroll to Network Setup, then press MENU/SELECT or
/SKIP.
4.Press or
to scroll to Auto set IP, then press MENU/SELECT or
/SKIP.
5.Press or
to scroll to No, then press
MENU/SELECT or /SKIP to save the setting. To exit without making changes, press CANCEL.
To enable Set static IP:
1.When the console is idle, press MENU/SELECT.
2.Press or
to scroll to System Setup, then press MENU/SELECT or
/SKIP.
3.Press or
to scroll to Network Setup, then press MENU/SELECT or
/SKIP.
4.Press or
to scroll to Set static IP, then press MENU/SELECT or
/SKIP.
5.The screen displays Enter static IP. Use the dialing keys to enter a specific IP.
• Press DELETE to delete a character.
Network Setup >Auto set IP Set static IP Discovery method
Auto Set IP
Yes >No
Network Setup Auto set IP >Set static IP Discovery method
Enter static IP 192.168.1._
• | Press # to add a dot. |
|
• | Press /REPEAT or | /SKIP to move the cursor to |
| the left or right. | <‘#’ = Add dot> |
When entering a specific IP, make sure the IP range is not blocked by the Ethernet switch or router.
34