![](/images/new-backgrounds/1236705/23670579x1.webp)
Getting started
System setup
Line group
You can set an extension or several extensions to receive the incoming calls from a specific telephone line. Other
1.When the console is idle, press MENU/SELECT.
2.Press or
to scroll to System Setup, then press MENU/SELECT or
/SKIP.
3.Press or
to scroll to Line Group, then press MENU/SELECT or
/SKIP.
4.Press or
to choose the desired line, then press MENU/SELECT or
/SKIP.
5.The screen displays Set Ext to Ring. Press or
to scroll to the desired extension, then press MENU/SELECT. Repeat this step until all desired extensions are selected.
•The extensions marked with a tick will ring when there is an incoming call from the line chosen in Step 4.
•The extensions not marked with a tick do not ring when there is an incoming call from the line chosen
in Step 4, unless the caller specifically tries to reach the extension through the auto attendant (see Auto attendant setup on page 83).
6.Press or
to scroll to Done, then press MENU/SELECT to save the setting. To exit without making changes, press CANCEL.
System Setup
Set Ext No.
Remove Ext No.
Prime Line
>Line Group
Network Setup
Network Info
Line Group >Line 1
Line 2
Line 3
Line 4
Set Ext to Ring |
| |
Done |
|
|
>Reception | 12 | 9 |
HR DEPT | 13 | 9 |
MKT DEPT | 14 |
|
Ext 15 | 15 |
|
Ext 16 | 16 |
|
32