
Getting started
Connecting desksets
To connect a deskset to your UP416 console (continued)
8.The deskset screen displays Starting... It takes a while for the system to finish the startup. The deskset enters the idle screen when the startup is done.
9.Lift the handset. If you hear a dial tone, the connection
was successful. | Starting... |
|
NOTES:
•If the connection is not successful, the deskset returns to the previous screen. Try the connection process again.
•Make sure you assign a unique extension number to the deskset.
•If you want to replace a deskset and keep the same extension number, make sure you release its extension number after disconnected from the console. See Release extension number on page 30.
24