VTech erisbusinesssystem 4-line office phones main console One touch, Assign a one-touch entry

Telephone operation

One touch

This telephone has 32 one- and two-touch memory locations (speed dial locations) where you can store the phone numbers or system extension numbers you wish to dial more quickly. You can store up to 30 digits in each location.

You can access the first 16 locations using only the one-touch buttons. To access the remaining 16 locations, press LOWER and then the one-touch button for the desired location. You might wish to write the names, telephone numbers, or extension numbers of the one-touch entries on the directory card, using the light gray spaces for the upper 16 locations and the white spaces for the lower 16 locations.

Assign a one-touch entry

Use the following steps to program the one-touch keys.

1.When the console is idle, press MENU/SELECT.

2.Press or to scroll to One Touch, then press MENU/SELECT or /SKIP.

3.Press or to scroll to Program, then press MENU/SELECT or /SKIP.

Ringers

Set Date/Time

>One Touch

Phone Settings

System Setup

Registration

Customer Support

4.The screen displays Enter Number:

5.Use the dialing keys to enter a telephone number (up to 30 digits) or an extension number.

•Press DELETE to delete a digit.

•Press /REPEAT or /SKIP to move the cursor to the left or right.

•You can include a pause while storing a dialing

sequence that requires one during actual dialing. Press or to choose Add pause, then press MENU/SELECT. A P appears on the screen.

•Store a signal for switching to temporary tone signaling. If you have dial pulse (rotary) service,

this signal is required for some special services. Press or to choose Send tone, then press MENU/SELECT. A T appears on the screen. All numbers you enter after this will send touch-tone signals during dialing.

One Touch

View >Program

Enter Number: 18005959511_

Select to:

Done

64