Caller ID
Caller ID operation
Save a caller ID entry to the directory
1.When in the caller ID history, press 
or 
to browse to the number you wish to save.
2.Press MENU/SELECT, then press 
or 
to choose Copy to DIR.
3.Press MENU/SELECT. The screen displays Enter Name. Use the dialing keys to edit the name.
L1 NEW 001/090
8005959511
>Copy to DIR Copy to
•Press DELETE to delete a character.
•Press 
/REPEAT or 
/SKIP to move the cursor to the left or right.
4.Press MENU/SELECT to save. The screen displays Enter Number. Use the dialing keys to edit
the number.
•Press DELETE to delete a digit.
•Press 
/REPEAT or 
/SKIP to move the cursor to the left or right.
Enter Number 8005959511_
Select to: 
Done
•You can include a pause while storing a dialing sequence that requires one during actual dialing. Press 
or 
to choose Add pause, then press MENU/SELECT. A P appears on the screen.
•Store a signal for switching to temporary tone signaling. If you have dial
pulse (rotary) service, this signal is required for some special services. Press 
or 
to choose Send tone, then press MENU/SELECT. A T appears on the screen. All numbers you enter after this will send touch- tone signals during dialing.
•You can store the flash signal required by some special services as part of a dialing sequence. Press 
or 
to choose Add flash, then press MENU/SELECT. An F appears on the screen. Continue storing the number as usual.
5.Press 
or 
to scroll to Done, then press MENU/SELECT. To exit without making changes, press CANCEL, or press 
or 
to scroll to Cancel, then press MENU/SELECT.
NOTE: You will need to change how a caller ID number is dialed if the entry does not appear in the correct format. Caller ID numbers might appear with an area code that might not be
necessary for local calls, or without a 1 that may be necessary for long distance calls (see View dialing options on the previous page for more information).
79
